From Hagen Schroot:
Hello, here are some pictures and videos from an Simson S51 V2 with 50HP. The Simson S51 is 50ccm motocycle with 3,6 HP stock bulid in East Germany in 1980`s. This Simson is the personal ride from an famous exhaust manufacturer for the Simson scene. At the moment is only 120km/h fast, because of the brakes , but lift up the front in 5tgh gear!
500 hp per litre? Unlikely, but probably still fun at 20 hp.
ReplyDeleteActually it's 2 50cc cylinders on a common block and likely both have a big bore kit installed. Maybe 80cc per? I'm not sure. But if it's really a 160 then it's certainly plausable.
ReplyDeleteActualy each of the cylinders has 94cc which adds a total of 188cc. The Bore is 52mm and the stroke is 44mm. Cylinders are called "Polini Big Evolution" for modern Motor Scoots. Carbs are two 28mm Stage6 PWK (a decent copy of the Keihin PWK)
ReplyDeleteIn the link below you can see the dynojet (Ammerschlaeger P4) protocol. The blue curve is the one of this engine. The other one is just for comparison to a 130cc single cylinder engine.
http://www.bitsau.de/1/polini/motorklein.jpg
Anyone know what temp gauges are used?
ReplyDelete"Anyone know what temp gauges are used?"
ReplyDeleteStage 6/koso
http://www.drowsports.com/product/171/Electrical/Gauges/Stage6_Temperature_Gauge_II
Actually it's 2 50cc cylinders on a accepted block and acceptable both accept a big bore kit installed. Maybe 80cc per? I'm not sure. But if it's absolutely a 160 again it's absolutely plausible.
ReplyDeletecustom painting
Great bikes. I especially love the V-Twin Exhausts. They really look unique.
ReplyDeleteile ten tuning kosztował około bo aż mnie telepie takie cudo sobie zrobić
ReplyDelete